How to install VI Monitor Plus
Apple iPhone
The initial setup must be done in the building connected to Wi-Fi.
Download the following applications.
VI Mobile Plus
Cisco Secure Client – used when not connected to the City Mission network.
Open VI Mobile Plus – Must be completed on the City Mission network.
Tap the + sign in the upper right.
Enter the following IP Address for the specific location you want to view.
Please note your ID and password will only allow you to view your assigned building.
Building A – 10.0.0.74
Building B – 10.00.95
Building C – 10.0.0.50
Laura’s Home – 10.0.100.57
Set up Cisco AnyConnect – This must be completed off the City Mission network. Disconnect from the network to complete.
Open AnyConnect
Toggle the AnyConnect VPN setting.
Description: City Mission
Server Address: vpn.thecitymission.org
Click Done and Add
Click Allow
Start the connection by tapping the toggle for “AnyConnect VPN.”
On the red screen click “Change Settings”
Uncheck “Block Untrusted Servers” and tap the “Home” button in the bottom left.
Tap the toggle for “AnyConnect VPN.”
Tap Continue
Enter the ID and password you use to log in to the PC.
You should now be connected.
Go back to the iPhone home screen and open VI Mobile Plus
You should be able to view the cameras.
Disconnect from VPN when you are finished.
Open AnyConnect
Tap the AnyConnect VPN toggle.
You are now disconnected.